Home
> Products > Switching-Routing-Interface
> Back
> Radial Engineering
Qualifies for FREE SHIPPING
|
|
|
||||||
|
Home
> Products > Switching-Routing-Interface
> Back
> Radial Engineering
|
||||||
|
|
|
|
||||
|
|||||||
Also see: Tonebone Products
|
||||
 |
Radial BigShot
ABY - Amp Switcher A passive guitar amp selector switch that allows the guitarist to toggle between two guitar amps or have them both play at the same time. The compact pedal features a guitar input, a thru-put for a tuner, and two outputs designated 'A' and 'B'. Output B is equipped with a ground lift switch and 180º polarity reverse to ensure both amps play in phase. For active buffered circuits, an isolation transformer may be inserted on output-B to eliminate ground loops. Construction is 14-gauge steel. More Info |
|||
 |
Radial BigShot
EFX - Effects Loop Switcher A foot activated true-bypass switch that enables guitarists to insert effects pedals into their signal chain and remove them when not in use, the BigShot EFX features two separate effects loops, each equipped with foot switch selector, 1/4" input and output connectors and ground lift to reduce hum & buzz caused by ground loops. More Info |
|||
 |
Radial BigShot
I/O - Instrument Selector |
|||
 |
BigShot MIX - true-bypass
effects mixer The MIX provides the ideal way to mix in effects in any guitar setup. The built-in buffer, activated when you hit the 'LOOP' footswitch, easily drives all of your effects. Click the footswitch and the true bypass circuit passes your pure untouched guitar signal directly through to your amp! More Info |
|||
 |
BigShot PB1 class-A power booster The Radial BigShot PB1 is a combination power booster and buffer designed to provide exceptional sonic performance for pedalboard users in a compact and simple package. It provides 15dB of boost, accessed using a guitar pick via a rear-mounted recessed control that is protected from foot stomp damage. More Info |
|||
 |
BigShot SW2 - Slingshot™ remote control The BigShot SW2 is a two channel universal remote control that can be used to replace two amplifier foot switches and combine their main functions with a single pedal. This is of primary importance for pedalboard users that always find themselves short on space. Both latching and pulse outputs are supported enabling the SW2 to control both older amps with contact closure style channel switching and newer amps with electronic pulse sensing. More Info |
|||
 |
 |
Radial
JDV Mk3 Radial's flagship direct box. Features their highly acclaimed Class-A feed-forward circuit design with huge 30V internal rail voltage for absolute no-compromise performance. The JDV Mk3 expands the functionality of regular direct boxes by providing a zoned working environment with 4 instrument outputs, in addition to the traditional balanced out. This allows unprecedented flexibility and creative setups. More Info |
||
|
||||
 |
Radial JDI The worlds finest passive direct box! It employs the legendary Jensen® JT-DBE transformer which is renowned for its warm Bessel response curve. Virtually zero-phase distortion, exceptional signal handling and the advantage of true isolation to eliminate hum makes the Radial JDI the choice for live sound reinforcement. More Info |
|||
|
||||
 |
Radial JDI Duplex
Stereo version... same info as the JDI A two channel version of the JDI for stereo keyboards, or bass rigs. All the same features as the JDI in a single box. Extremely rugged construction, virtually zero phase distortion, the Duplex is the perfect choice for live stages where eliminating noise is essential. More Info |
|||
|
||||
 |
Radial Pro DI and Pro
D2 Available in single-channel (ProDI) or dual-channel (ProD2) stereo, these exceptional direct boxes offer performance superior to any other DI's in their price range and are ideally suited for use with acoustic guitar, bass and keyboards. More Info |
|||
|
||||
 |
Radial JD7 Injector A Jensen® transformer equipped guitar level signal distribution system that allows one guitar to drive up to 7 amps at the same time with push-button ease. Balanced I/O allows simultaneous record and playback of tracks for re-amplification... get creative! More Info |
|||
|
||||
 |
Radial X-Amp An active re-amplifying device that allows pre-recorded guitar tracks, voice from mic-preamps or keyboards to drive guitar amplifiers or effects pedals. It features a balanced line level XLR input and two 1/4" outputs to drive two guitar amplifiers or effect pedals, one of which is transformer isolated to eliminate ground loops. The X-Amp employs 100% discreet components in a unique Class-A feed-forward circuit design for optimum sound quality. Features level control, overload LED and input/output ground-lift options. More Info |
|||
|
||||
| Special Order: 1-2 weeks lead time prior to shipment | ||||
 Click image to enlarge |
Radial JD6 Six Channel DI The Radial JD6 is a 6 channel direct box that has been optimized for stage use - Six of the legendary Radial JDI channels are mounted into a single rack space for maximum density. Channels 1 and 2 offer a ‘Swiss Army’ extended feature set for computer sound cards, keyboards, and studio interface while channels 3 to 6 are optimized for stage. Retail: $1000.00, Our Price: $899.99, special order. Lead time is about 1-2 weeks. Resources / Manuals |
|||
|
||||
 Click image to enlarge |
Radial J-Rack Direct Box Rack-Mount Adaptor The J-Rack is a unique direct box shelf and 19” rack adaptor that allows up to 8 JDI or J48 direct boxes to be rack-mounted in 2 rack spaces. This unique adaptor allows improved inventory management for sound companies allowing DI inventory to be used as stand-alone or rack mount depending on tour needs. Our Price: $119.99, special order. Lead time is about 1-2 weeks. |
|||
|
||||
 |
Radial Resources Here you will find more information about Radial products such as artists lists, user reviews, magazine reviews, user manuals and more. |
|||
|
||||
|
|
|
|
Home
> Products > Switching-Routing-Interface
> Back
> Radial Engineering |
|
|
© 2000-2007, Stompin-Ground.com |
|
