Power Supply Cables for the Pedal Power 2 and others

Cables for Pedal Power 2

Home > Products > Power Supplies > Pedal Power 2 > Back > Cables for Pedal Power 2

Qualifies for FREE SHIPPING
Continental US only • Restrictions apply • More Info

All cables listed here are for the original Pedal Power, Pedal Power 2 and Pedal Power 2+
Also see: Pedal Power AC cables • AC Distribution • Power Conditioners

Important Power Cable Info

• Most cables listed as "stock" and "custom" are in stock.
• Cables marked "Made to Order" need approximately 5 extra business days to complete.
• Items listed here may work on many other power supplies.
• "Double volt" and "double amperage" cables require a power supply with isolated outputs like the Voodoo Lab.
• All images are for reference only and may look somewhat different on the actual cable.
• Cables may use round coax or parallel zip type cable depending on materials available.

Reference:

5.5mm x 2.1mm Barrel Plugs: Most popular... Boss, Danelectro, Prescription, Guyatone, Maxon, Teese RMC's, Line6 ToneCore (not modelers, see below), late model MXR, most Ibanez, most Dunlop, most Fulltone, newer DOD, some Morley and many others.

3.5mm (1/8") Mini Plugs: Pro-Co Rat, some Electro-Harmonix, Klon, Lovetone, older DOD, some early MXR and others.

5.5mm x 2.5mm Barrel Plugs: These look very similar the popular barrel plug listed above however these have a slightly larger center hole. Used on some Line6 Modelers, some Electro Harmonix, some wireless units and others. The Line 6 modeling pedals (DL4, MM4, DM4, AM4, and FM4 only) require a reversed polarity cable. Electro Harmonix use this for certain pedals only.

9 Volt Battery Clip: 9 volt effects that do not have an AC adapter jack such as some older pedals and some newer boutique pedals. Use with any effect that has a 9 volt battery clip including older Ibanez, older MXR, Z-Vex and others.

Stock Cables • 5.5 x 2.1mm Barrel • Y-Cables
Double Amperage • Double (18) Volt 2.1mm • Double Volt, Reversed 2.5mm
Reversed Polarity • 3.5mm (1/8") Mini Plug • Line 6 • Extensions • Extra-Long Cable • DIY Parts

Stock Cables For Pedal Power 2 All Voodoo Lab brand cables are approximately 20" long.	Price Each	Quantity
5.5mm x 2.1mm standard polarity - Voodoo Lab brand, straight plugs. See other custom lengths here.	3.49
5.5mm x 2.1mm Right Angle - Voodoo Lab brand (* see note). Right angle version of the above. Right angle plugs on both ends.	3.49

More 5.5mm x 2.1mm standard polarity right angle cables - MKS brand Both of the stock Power Pad II cables by MKS listed below are compatible with the Voodoo Lab Pedal Power series. They have 5.5mm x 2.1mm right angle plugs on both ends and the handle's smaller diameter does not interfere with the recessed jack as mentioned in the note (*) below.
24" - Stock MKS cable	3.49
36" - Stock MKS cable	3.49

5.5mm x 2.1mm REVERSED polarity - Voodoo Lab brand, straight plugs. Some of the older Dunlop pedals, some Fulltone pedals and others may use reverse polarity power (typically center positive, barrel negative). See other custom lengths here.	3.49
5.5mm 2.1mm REVERSED polarity, Right Angle - Voodoo Lab brand (* see note). Right angle version of the above. Right angle plugs are on both ends.	3.49

3.5mm (1/8") Mini-plug - Voodoo Lab brand. See more custom 3.5mm cables here.	3.49
3.5mm (1/8") Mini-plug, Right Angle - Voodoo Lab brand (* see note) Right angle version of the above. Right angle plugs are on both ends.	3.49

Line 6 Cable for Modelers, 5.5mm x 2.5mm - Voodoo Lab brand See more custom cables for these Line 6 here. The ToneCore pedals use the standard "Boss" type, 5.5mm x 2.1mm.	3.49
Line 6 Cable for Modelers, 5.5mm x 2.5mm, Right Angle - Voodoo Lab brand. Right angle version of the above. Right angle plugs are on both ends.	3.49

9 volt battery clip - Voodoo Lab brand See battery clip extension here.	3.49

* Note: The right angle versions of the "Voodoo Lab" brand power cables noted with a [ * ] have a slightly larger diameter on the plastic handle of the 5.5mm x 2.1mm plugs that may interfere when trying to insert it into a recessed jack. The remedy would be to trim or whittle down the handle diameter slightly with a utility knife so it will fit into a recessed hole. We found this to be true on the RMC wahs, for example. There may be others but the fix is pretty easy.
IEC Power Cords The Pedal Power supplies come with a 6' main detachable AC power cord. We have both longer and shorter cords available as well as a right angle version. Standard female IEC connector on one end and a grounded 3-prong plug on the other end. The standard IEC connector fits the Voodoo Lab power supplies and many amplifiers, computers and much more. UL listed. Click here for more info

Custom Cables
The long list of cables below are typically in-stock. Other plug sizes, lengths, extensions and polarities may be custom made with an approximate 1 week lead time. You must submit very clear and detailed requirements including cable length, plug specifications, polarity, etc. Please contact us with your specifications.

5.5mm x 2.1mm - Standard Polarity

Straight

2.1mm Barrel

Quantity

5" to 35" long. Straight plugs, both ends.

Custom stock cables are $9.95 each
"Made to order" cables are $11.95 each

Right Angle

2.1mm Barrel

Quantity

5" to 70" long. One straight plug and one right angle plug.

Custom stock cables are $9.95 each
"Made to order" cables are $11.95 each

Right Angle - Both Ends - See stock cable

Y-cables - with ground lift	Price Each	Quantity
Standard Polarity - Center Negative - 5.5mm x 2.1mm. Power two 9 volt pedals with only one output. One lead is ground lifted to eliminate ground loops. The 2 effects must share the same audio ground (in the same audio chain) and use the same type of power, polarity, etc. Straight - Straight plugs with round cable are standard.
7" - Y-extension cable. Adapts any 1 Boss type cable into 2 plugs. See more extensions here	13.95
15" - Y	13.95
20" - Y	13.95
25" - Y	13.95
30" - Y	13.95
35" - Y	13.95

Right Angle - Note: The 2 right angled ends plug into your effects. The power supply plug will always be straight. Parallel, zip type cable.
15" - Y - Right Angle	13.95
20" - Y - Right Angle	13.95
25" - Y - Right Angle	13.95
30" - Y - Right Angle	13.95
35" - Y - Right Angle	13.95

Double Amp Cable

Price Each

Quantity

Double Amperage Y -type Extension Cable - 7" Long. Use to connect two output jacks into one and double the amperage. There is an in-line jack on the other end to connect (extend) any single Voodoo Lab type power cable. The 2 output voltages and DIP switch settings must be identical.

IMPORTANT NOTE: This cable has been requested often and is used but it is not openly recommended by Voodoo Lab. This is the only cable here not recommended by Voodoo Lab. Use at your own discretion.

7.95

Double-Volt cables, 2.1mm - (18 volts typical, 8-32 range)	Price Each	Quantity
Standard Polarity - 5.5mm x 2.1mm. Uses 2 outputs and sums their voltage. Typically used to power 18 volts, center negative. Other voltages can be obtained using various outputs. Straight - Straight plugs with round cable are standard.
15" - Double-Volt	13.95
20" - Double-Volt	9.95
25" - Double-Volt	13.95
30" - Double-Volt	13.95
35" - Double-Volt	13.95

Right Angle - The right angled end plugs into your effect. Both of the power supply plugs will always be straight. Parallel, zip type cable.
15" - Double-Volt - Right Angle	13.95
20" - Double-Volt - Right Angle	13.95
25" - Double-Volt - Right Angle	13.95
30" - Double-Volt - Right Angle	13.95
35" - Double-Volt - Right Angle	13.95

Double-Volt cables, 2.5mm, REVERSED POLARITY Commonly used to power 24 volt Electro Harmonix pedals	Price Each	Quantity
Reversed Polarity - 5.5mm x 2.5mm plug. Uses 2 outputs and sums their voltage. Typically used to power certain Electro Harmonix pedal at 24VDC, 100 mA, center positive. Includes Deluxe Memory Man, Stereo Memory Man, Q-Tron, Q-Tron+, Micro Synthesizer, Bass Micro Synthesizer, Stereo Polychorus, Deluxe Electric Mistress, Worm. Straight - Straight plugs with parallel, zip type cable is standard.
15"	13.95
20"	9.95
25"	13.95
30"	13.95
35"	13.95

Right Angle - The right angled end plugs into your effect. Both of the power supply plugs will always be straight. Parallel, zip type cable.
15" - Right Angle	13.95
20" - Right Angle	13.95
25" - Right Angle	13.95
30" - Right Angle	13.95
35" - Right Angle	13.95

5.5mm x 2.1mm - REVERSED POLARITY	Price Each	Quantity
Some of the older Dunlop pedals, some Fulltone pedals and others may use reverse polarity power (center positive, barrel negative). Straight - Round cable
15" - Reversed	9.95
20" - Reversed	9.95
25" - Reversed	9.95
30" - Reversed	9.95
35" - Reversed	9.95

Right Angle - Parallel, zip type cable. 1 plug right angle, 1 straight.
15" - Reversed - RA	9.95
20" - Reversed - RA	9.95
25" - Reversed - RA	9.95
30" - Reversed - RA	9.95
35" - Reversed - RA	9.95

3.5mm Mini Plug Cables (1/8")	Price Each	Quantity
Pro-Co Rat, some Electro-Harmonix, Klon, Lovetone, older DOD, some early MXR and others may use this type of plug. One end is a 5.5mm x 2.1mm plug and the other is the 3.5mm mini plug. Straight - Straight plugs with round cable.
15"	9.95
25"	9.95
30"	9.95
35"	9.95

Right Angle - Power supply end is straight.
15" - RA	9.95
20" - RA	9.95
25" - RA	9.95
30" - RA	9.95
35" - RA	9.95

Line 6 Cables - Modeling Pedals Only	Price Each	Quantity
For DL4, MM4, DM4, AM4, and FM4 modeling pedals only. These Line 6 pedals require a special 5.5mm x 2.5mm reversed polarity cable. Not for the ToneCore pedals which use the standard "Boss" type, 5.5mm x 2.1mm. Straight - Straight plugs with round cable.
15"	9.95
25"	9.95
30"	9.95
35"	9.95

Right Angle - Parallel, zip type cable. Power supply end is straight.
15" - RA	9.95
20" - RA	9.95
25" - RA	9.95
30" - RA	9.95
35" - RA	9.95

Extensions - Extend from any Boss type 2.1mm cable.	Price Each	Quantity
Note: ALL extensions have a 5.5mm x 2.1mm straight in-line jack on one end and various plugs on the other end. You may extend from any standard polarity 2.1mm cable such as the stock "Boss" type cable.
Y-extension cable - 2.1mm - 7"- Straight Adapts any 1 Boss type cable into 2 plugs. One plug is ground lifted to eliminate possible ground loops.	13.95
2.1mm Boss type Extension - 5" - Straight	9.95
2.1mm Boss type Extension - 10" - Straight	3.95
2.1mm Boss type Extension - 15" - Straight	9.95
2.1mm Boss type Extension - 20" - Straight	9.95
2.1mm Boss type Extension - 5" - Right Angle	9.95
2.1mm Boss type Extension - 10" - Right Angle - High Profile This right angle plug protrudes about 1/4" more than the others.	3.95
2.1mm Boss type Extension - 10" - Right Angle	9.95
2.1mm Boss type Extension - 15" - Right Angle	9.95
2.1mm Boss type Extension - 20" - Right Angle	9.95
2.1mm Reverse Polarity Extension Some of the older Dunlop pedals, some Fulltone pedals and others may use reverse polarity, center positive, barrel negative. 5" long.	3.95
2.1mm Reverse Polarity Extension - Right Angle	3.95
1/8" ( 3.5mm) Mini-plug Extension Pro-Co Rat, some Electro-Harmonix, Klon, Lovetone, older DOD, some early MXR and others may use this type of plug. 5" long.	3.95
1/8" ( 3.5mm) Mini-plug Extension - Right Angle	3.95
2.5mm Reverse Polarity Extension For Line 6 Line 6 pedals are reversed polarity. 10" long.	3.95
2.5mm Reverse Polarity For Line 6 - Right Angle	3.95
9-Volt Battery Clip Extension For 9 volt effects that do not have an AC adapter jack such as some older pedals and some newer boutique pedals. Use with any effect that has a 9 volt battery clip including older Ibanez, older MXR, Z-Vex and others. 7" long.	3.95

Extra Long Power cables: Made with a heavier duty round cable. Priced from $18.85 to $21.95. Choose the shortest length practical to minimize voltage drop but it's typically not an issue. For reference, a 15' cable at 100 mA's will drop < 0.1 volts and 30' cable < 0.2 volts. Less amps, less drop. Available lengths (in feet): 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20, 22, 24, 26, 28, 30. Production lead time is about 3-5 business days.

Step one:	Step Two:	Step Three:
Select Length (in feet)