Click images to enlarge
• Four 9V isolated high-current 400mA output sections
(2 with 12V option)
• Powers Strymon, Eventide, Line 6 (excludes M9/M13),
Boss Twin, TC Electronic Nova and more
• Also compatible with all 9V battery operated
• Linear regulation and toroidal transformer for
lowest possible noise
• Compact design fits small pedalboards and rack
• Includes cables and detachable AC line cord
• Engineered and handmade in the USA
• 5-year warranty
Pedal Power Digital is manufactured to operate from a specific supply
voltage. There are three different models, which accept 100V, 120V, or
240V mains. All units sold in North America are for 120V only. You cannot
operate a 120V model using 240V power without the correct step down transformer.
The supply voltage is marked on the bottom of the unit.
Every output on Pedal Power Digital is individually short-circuit protected.
This means that if you have a short in a power cable, or one of your pedals
malfunctions, the Digital will turn off the power to only that pedal.
All other outputs will continue to function normally without long-term
North American Version, 120 VAC
Also See: DC cables
• IEC power cords • Power
Voodoo Lab Pedal Power Digital
Pedal Power Digital is a linear (analog) power supply
for high-current DSP-based pedal effects and accessories. With 4 completely
isolated, filtered, and regulated output sections, Pedal Power Digital
keeps your pedals dead quiet and free from high-frequency noise that occurs
with digital "switching" power supplies.
Pedal Power Digital will properly power up to 4 digital power-hungry
effects like those from Strymon, Eventide, Line 6, TC Electronic and more.
Its compact size is perfect for small pedalboards, rack shelves, and as
an additional power supply for larger boards.
Built to meet the needs of professional users, Pedal Power Digital will
provide clean, consistent power, even under the poor AC line conditions
often found on stage. Completely isolated output sections eliminate ground
loops and unwanted interactions between effects, resulting in lower noise
and noticeably improved tone.
Isolated power specifically designed to make
digital pedals sound their best.
Pedal Power Digital Specifications
Detachable IEC (computer-type) line cord
120V 50/60Hz (North America model)
5.5x2.1mm barrel connectors center negative
Short circuit protected
9 VDC (2) - 400 mA
9/12 VDC (2) - 400mA
4.9" wide x 3.4" deep x 1.8" tall (124 x 86 x 44 mm)
Weight: 1.6 lbs
Toroidal power transformer
For information on additional cables, go
5.5mm x 2.1mm barrel plugs, right angle on both
5.5mm x 2.5mm right angle barrel plug on the
effect end and a 5.5mm x 2.1mm right angle barrel plug on the power
Detachable IEC power cord, 6'.
A shorter length is shown here for reference