G&H Straight TRS Stereo Plug, Nickel
- More Info
- Reviews (0)
1/4” BigFoot Nickel Plated TRS Plug
The BF3PM Series is designed to continue our tradition of highest quality signal transmission and rugged reliability. It incorporates our OFC copper core for the hot and brass for the return and ground. The Tip, Ring, and Sleeve are assembled by insert molding the insulation between and around the components. Then the copper is cupped for soldering, the ring terminal is the same height as the hot for ease of wire prep. The ground/strain relief is staked for a solid connection that won't loosen.
• OFC copper core for highest conductivity
• 1/2” profile file for highest packing density
• Tin plated solder tabs for ease of soldering
• Solid brass housing protects the plug
• Separately crimped ground won't loosen
• Hot solders directly to the copper core for clean signal transmission
• Design eliminates the need for an insulator over the ground making soldering easier
The Original G&H Bigfoot 1/4 Plugs
The original Bigfoot Series Standard 1/4" Connector plugs will spare you the embarrassment, time and cost of having to make repairs to your audio system at an inopportune time (or any time) due to plug failure. That translates into lasting value. You can be assured of may years of fail-safe operation. Standard 1/4 Connectors are available in 2 and 3 conductor versions, has an inner assembly that is press fit and staked into place before assembly, ensuring mechanical and electrical integrity for years. These plugs use nylon insulators that are moldable, consistent, and more dimensionally stable, as well as a filleted area between the shaft and nut portions of the sleeve, so stress is distributed over a larger area of the assembly. Our plugs have a copper tip/conductor that not only provides the maximum in conductivity, but also is stretchable and can be bent back into its original shape, with NO loss of performance.